Basic version DW 3080K Mammoth

• heavy-duty 24" wide tracked chassis, ideal for rough terrain
• Mercedes-Benz diesel motor OM 502 LA, 610HP
• fully lit engine compartment with step ladder access
• sound-proof engine compartment; extremely low noise emission
• complete machine access from all sides
• fuel tank 2x 80 gal.; unit averages 16 gph
• fluid coupling power transfer
  
• hydraulic cooling system
• unit operated remotely with 9 or 16 channel remote
• reversing fan
• fan swings away from the engine for ease of maintenance
• shaft length 10', diametre 32" (not including teeth)
• shaft can be fitted w/ 5 types of teeth, depending on application
• teeth fitted with bolt-on replaceable tips for easy maintenance
• rear conveyor length 16.5', width 4', hydraulically folds
• transfer conveyor under shaft situated on heavy-duty slider bed
• transfer conveyor made from steel-core, rip-stop belt
• hydraulically-operated access door for shaft/comb maintenance
  
• antimagnetic central part of rear conveyor
• heavy-duty comb placed into position by hydraulic rams with nitrogen-filled accumulators allowing comb to break away and reposition during operation, preventing uncrushable damage.
• comb can be fitted w/ variety of teeth, depending on application
• comb teeth are wedged in place and are easily replaceable
• paint: 2-component paint RAL 2011, deep orange

Optional equipment

• special paint in RAL colors, instead of RAL 2011
  • basic thickness 50 µm, cover thickness 40 µm
• winter equipment for Mercedez-Benz diesel OM 502 LA
• complete remote control w/ following functions:
  • includes sender/receiver, holder for sender
  • loading cable 12/24V, 230V
    
  • 2 batteries
    
  • motor stop, motor speed +/-
    
  • comb open/closed
    
  • roller reverse
    
  • lower belt reverse
    
  • rear/lower coveyor on/off
    
  • machine move and steer
• additional hydraulic connection 22 cm3 at rear
  • e.g. for driving an additional conveyor
• complete trapezoidal tooth inserts, 2.4" wide
  • 21 pcs. per roller, 22 pcs. per comb
• comb extension, 3 - layers
  • 20 steel bows and steel wedges (when dismounting: wide wedges necessary)
• rear conveyor 31.5', belt width 4'
  
• damping facility for external water supply
• overband magnet with hydraulic for rear conveyor
  • 16.5'/26'/31'
  • requires antimagnetic central part of rear conveyor and additional hydraulic connection
• magnetic pulley for rear belt
  • upper return drive pulley as permanent magnet, w/ chute